The thing most don’t know about CPM-3V is that it is a powder metallurgy version of an older conventional steel called Vasco Die. Vasco Die was patented by Harry Johnstin of VASCO in 1964 [1]. This was the first popular “8% Cr die steel” which created a new category. The most popular cold work die steels were (and are) A2 and D2. D2 is used for higher wear resistance and A2 is used for higher toughness. The 8% Cr is right in the middle between D2 (12%) and A2 (5%). And with the 2.5% vanadium for wear resistance and the relatively low carbon of 0.8% it has an interesting combination of properties, better overall than either A2 or D2. The steel was advertised as twice as tough as D2 while have ten times the wear resistance of A2. This created a new category of cold work die steel which is still seen today in steels like DC53 and Sleipner. You can read more about the history of Vasco Die and all of the developments that led up to it in my book The Story of Knife Steel. Vasco Die was never really used in knives, though the higher carbon version, Vasco Wear, did get used by some knifemakers, and by Gerber in some production knives. And of course CPM CruWear, the PM version of Vasco Wear, has also developed some popularity in recent years.
I am looking forward to Larrin’s latest Crucible update. The story has faded from the news now that the dust is settling.
Here is the video for this one…
Or if you want to read the whole thing yourself…